INVT GD350-015G/018P-45-AS

Goodrive350 IP55 High-ingress Protection Series VFD Basic Operation Instructions
-116-
Function
code
Name
Description
Default
value
66: EtherCAT communication fault
(E-CAT)
67: Bacnet communication fault (E-BAC)
68: DeviceNet communication fault
(E-DEV)
69: Master-slave synchronous CAN slave
fault (S-Err)
70: EC PT100 detected overheating
(OtE1)
71: EC PT1000 detected overheating
(OtE2)
72: EtherNet/IP communication timeout
(E-EIP)
73: No upgrade bootload (E-PAO)
74: AI1 disconnected (E-AI1)
75: AI2 disconnected (E-AI2)
76: AI3 disconnected (E-AI3)
P07.33
Running frequency at
present fault
0.00Hz–P00.03
0.00Hz
P07.34
Ramps reference frequency
at present fault
0.00Hz–P00.03
0.00Hz
P07.35
Output voltage at present
fault
0–1200V
0V
P07.36
Output current at present
fault
0.0–6300.0A
0.0A
P07.37
Bus voltage at present fault
0.0–2000.0V
0.0V
P07.38
Max. temperature at present
fault
-20.0–120.0°C
0.0°C
P07.39
Input terminal state at
present fault
0x0000–0xFFFF
0
P07.40
Output terminal state at
present fault
0x0000–0xFFFF
0
P07.41
Running frequency at last
fault
0.00Hz–P00.03
0.00Hz
P07.42
Ramps reference frequency
at last fault
0.00Hz–P00.03
0.00Hz
P07.43
Output voltage at last fault
0–1200V
0V
P07.44
Output current at last fault
0.0–6300.0A
0.0A
P07.45
Bus voltage at last fault
0.0–2000.0V
0.0V
P07.46
Max. temperature at last
fault
-20.0–120.0°C
0.0°C
P07.47
Input terminal state at last
fault
0x0000–0xFFFF
0
P07.48
Output terminal state at last
fault
0x0000–0xFFFF
0
P07.49
Running frequency at last
0.00Hz–P00.03
0.00Hz