Cub Instrument User Manual V2.4
Unrivalled Gas Detection. Page 45 of 46 ionscience.com
Cub Doc Power Supply Requirements
Power supply requirement for Cub Doc Docking Stations is as follows:
• Through the IEC mains plug limited to a nominal of 100Vac to 240Vac +/-10% input range.
The inlet fuse is Mains ceramic 1A time lag (anti-surge 20 x 5mm cartridge).
or:
• Through the rear DC socket connected to a 12V car auxiliary/ (cigarette lighter) outlet.
Warranty
Standard Warranty can be extended to up to 2 years on the Cub when registering your instrument
via our website: http://ionscience.com/instrument-registration.
To receive your Extended Warranty, you need to register within one month of purchase (Terms and
Conditions apply). You will then receive a confirmation email that your Extended Warranty Period
has been activated and processed.
Full details, along with a copy of our Warranty Statement can be found by visiting:
http://www.ionscience.com/customer-support/instrument-registration/.
To Next Page
Loading...
