IP Power 9258 - CGI Commands for Power and Current

- 52 -
mac=007628000284</p>
<!--CGI-DATAEND-->
2.3 To get the status of power on/ off： getpower
http://192.168.1.18/set.cmd?cmd=getpower
System return：
CGI Command : Data follows
p61=0, p62=0
P61 to P62 means : POWER1 to POWER2
2.4 To set the power on / off ：setpower&p6x=0 or 1
p6x=0 means off，p6x=1means ON，x can be 1 to 2 ( power1 to power 2)
Example : Turn on POWER1 and turn off POWER2：
http://192.168.1.18/set.cmd?cmd=setpower&p61=1&p62=0
System return： CGI Command : Data follows
p61=1,p62=0,p63=0
2.5 Setup power to reboot as RESET：setpowercycle& p6x=delayTime
X can be 1to 2 ( power 1 to power 2 ) ，；dealyTime mean the time ( second) waiting
for reset
For example :
http://192.168.1.18/set.cmd?cmd=setpowercycle&p61=5&p62=2
System return： CGI Command : Data follows
p61 cycle ok,p62 cycle ok
2.6 Get current Amp value : getcurrent
For example :
http://192.168.1.18/set.cmd?cmd=getcurrent
System return：
<!--CGI-DATABEG-->
<p>
c61= 0.0, temp=28.3</p>
<!--CGI-DATAEND-->