Need help?Do you have a question about the IP Power 9258 and is the answer not in the manual?
Provides step-by-step instructions for connecting the device to a network via router or directly to a PC.
Details configuring IP settings using IPEDIT, including matching gateway and IP addresses for network access.
Details network connection types like Static IP, DHCP, and UPNP, along with static IP configuration steps.
Explains obtaining IP addresses automatically via DHCP and configuring DNS/port settings for network access.
Details methods for connecting to the device's web interface via IP Edit or directly through a web browser.
Details manual port control and power cycle operations, including setting delay times for ON/OFF control.
Guides on adding scheduled events, including selecting duration, date range, and specific power actions.
Guides on configuring email settings for receiving alerts on device boot-up or status changes.
Details controlling power outlets via email commands using POP3, including command format and examples.
Allows changing administrator account, password, and setting authorization levels (Admin, Operator, Viewer).
Provides instructions and precautions for updating the device firmware, emphasizing LAN connection and browser compatibility.
Details using CGI commands via a web browser for device control, including authorization and specific command syntax.
Explains commands for retrieving power status, setting power ON/OFF, rebooting, and getting current amp values.
Guides on enabling Telnet and using Telnet commands for device control, including specific commands for model 9828.
General| Input Voltage | 100-240VAC |
|---|---|
| Current Rating | 10A |
| Frequency | 50/60 Hz |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | HTTP, SNMP, Telnet |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5-95% RH, non-condensing |
| Certifications | CE, FCC |
To Next Page
