- 31 -
Network :
There are 3 sections in this port : LAN Network , DNS setting and Port setting
LAN Network Settings :
The network status is connected by ether cable with RJ45 connector. There are 3 ways to
connect the network : By Static IP / DHCP / UPNP
A. Static Mode (fixed IP) :
Setup IP address , DNS and Port manually. This allows the 9828 to obtain an IP Address
automatically from user`s server connected to Internet. Recommended for users who need to
control through Internet.
Please do fill up the correct gateway / port for login from Internet .
Please do fill up the correct DNS server for sending / receiving email ( alarm) .
To Next Page
Loading...
