- 19 -
Control
There are 2 setting pages in this Section. One is “ Power Control “ and another one is “Advance
Setup “
A. Power Control :
User can do the following 3 basic operation in this page :
1. Manual control each port ON or OFF directly by pressing the power sign.
2 Power Cycle control : Manually Control the relay delay to turn ON / OFF . The relay cycle
time can be set from 1 to 9999 seconds
User can set up the time and the final status in power cycle as ON / OFF
For example : ( sec = seconds )
- Original Outlet as “ OFF “ , select final status as “ ON “ & fill 15sec :
After press power cycle button, the outlet will turn OFF for 15 seconds and then turn ON .
OFF ( 15 sec ) → ON
- Original Outlet as “ ON “ , select final status as “ ON “ & fill 10sec :
After press power cycle button, the outlet will turn OFF for 10 seconds and
then turn ON .
ON -- > OFF ( 10 sec ) → ON
- Original Outlet as “ OFF “ , select final status as “ OFF “ & fill 8 sec :
After press power cycle button, the outlet will turn ON for 8 seconds and
then turn OFF .
To Next Page
Loading...
