Ipevo Ziggi - System Requirements and Installation; PC and Mac System Specifications; Software Installation Procedures; Connecting and Launching Ziggi

System Requirements/Installation
8
System Requirements
Ziggi requires a PC or Mac system with these minimum specifications:
PC
• Microsoft Window 7, Vista or XP
• 1.4GHz CPU or higher (2.4GHz recommended)
• 512MB RAM (1GB recommended)
• 200MB free hard disk space
Mac
• Mac OS X 10.5 or higher
• 1.4GHz CPU or higher (2.4GHz recommended)
• 512MB RAM (1G recommended)
• 200MB free hard disk space
Installation
PC
• Insert the CD-ROM into your computer’s drive. Follow the prompts to complete the installation of the
P2V software. A black and white Ziggi icon will appear in your taskbar, which can be used to open or
close the software.
Note: If the installation program does not automatically appear, you may navigate to the CD-ROM drive
through Windows Explorer (often the D drive), open the Ziggi CD-ROM, and double-click “setup.exe” to run
the installation.
Mac
• Insert the CD into your computer and activate the disk image file (*.dmg). Copy the P2V application file
into the Applications directory.
After installation, perform the following:
1. Connect the Ziggi’s USB cord to any open USB port on your computer.
2. Launch the P2V software. A screen containing a live video image from your Ziggi should appear. The
Ziggi is now ready to use.
Note to Point 2 View owners: If you have previously purchased IPEVO’s Point 2 View USB Document Camera,
you may have an older version of the software installed on your system. You will need to uninstall this
software prior to successful installation of the latest version of the P2V software.