MIG-185CMT
5
PURPOSE AND USE
IPOTOOLS MIG-185CMT is a multifunctional welding machine with MAN (manual MIG), SYN MIG, HF
TIG, CUT and MMA welding options. Any other use may endanger the safety of the welder or cause the
device to malfunction! Use of the device in violation of these operating instructions is not permitted!
Damage to the device resulting from improper use is not covered by the warranty statement. The
machine can be used to weld several materials, such as steel and stainless steel. The welding current
is stable and stepless adjustable. The appliance provides a beautiful weld, and the welding itself takes
place quietly and without spattering. The device is small in size, light and thus easy to transport.
TECHNICAL INFORMATION
MIG/HF TIG/CUT/MMA welding machine MIG-185CMT
230V 1-Phase / Frequency: 50/60Hz
Max. welding wire diameter Ø
0,6mm / 0,8mm / 0,9mm / 1,0mm / 1,2mm
Note: The above parameters may change with future machine improvements!
OPERATING CONDITIONS & WORKING ENVIRONMENT
1. Operating conditions:
• Voltage, voltage source : AC 220V/230V/240V,
• Frequency: 50/60Hz,
• Reliable grounding.
2. Work environment
• Relative humidity: not more than 90%,
• Ambient temperature: -10 ℃ ~ 40 ℃,
• The welding site must not contain any harmful gas, chemicals, mold and flammable
substances, explosive and corrosive media. The welder must not be subjected to any vibration
or other disturbances,
• Avoid rain and water, work in such circumstances is prohibited.
To Next Page
