MIG-185CMT
6
BEFORE STARTING WORK
Before welding, it is necessary to read and understand the instructions of use,
Check the machine for any defects or damage,
To ensure the safety of persons and equipment, it is necessary to properly install the earthing,
depending on the requirements of the power supply system.
Welding must take place in a dry and well-ventilated area. Objects in the vicinity must be at least 0,5 m
away from the appliance,
Check that all cables are tightly fastened / connected,
The appliance must not be moved while the appliance is switched on and welding is in progress.
The appliance must be maintained, used, and operated by a qualified person,
To Next Page
