Iridium 9505A - Signal Strength and Battery Meter

102 Using Calling Features
Deactivating Pending Call Drop Signal
Under rare circumstances, due to system
overcapacity or a satellite outage, a satellite may not
be available to take your call. When this happens,
your phone notifies you with a series of three
consecutive tones and displays
Pending Call Drop.
The tones continue periodically until a new satellite
moves into range or the call is dropped.
To activate or deactivate the alert tones:
1. Follow the steps in the “Getting to Call
Related Features...” to get to
Pending Call
Drop
, and then press O to select.
2. Press
M to scroll to either On or Off, and then
press
O to select.
3. Press and hold
C to exit the menu..
Getting to Call Related Features...
1. Press M until you see Call Related Features, and then
press
O.
2. Press M to scroll to one of the features described below. You
will see the feature name, followed by
Select?.
10CallRelated-kg.fm Page 102 Wednesday, November 3, 2004 9:37 PM