Using Message Services 119
Go to the Next Message
This feature takes you to the next message in the
outgoing messages list.
To go to the next message:
1. Follow the steps in “Read a Stored
Message” on page 118.
2. Press
M until you see Go To Next Message and
then press
O. You will see the next
message.
3. Press
M to scroll through the message one
screen at a time.
4. Repeat steps 2 to 3 to read all of your
messages.
5. Press and hold
C to exit the menu.
Send a Stored Message
This feature sends a message stored in the
outgoing messages list.
To send a stored message:
1. Follow the steps in “Read a Stored
Message” on page 118.
2. Press
M until you see Send Message and then
press O. You will be prompted to enter the
destination address (phone number) for the
message.
3. Enter the destination address and then
press
O to send the message.
If the destination is a phone number, enter it
beginning with “00” or “+”. If the destination is
an email address, enter “00*2” or “+*2”.
The message is sent to your message service
center, which forwards the message to its final
destination. You will see
Message Sent when the
message arrives at the service center.
11Message-kg.fm Page 119 Wednesday, November 3, 2004 9:37 PM
To Next Page
Loading...
