116 Using Message Services
Edit a Message
You can edit a new message at any time while you
are creating it.
You can also edit received messages or messages
stored in the outgoing messages list. See “Edit a
Received Message” on page 112 for instructions on
how to copy a received message into the message
editor. See “Edit a Stored Message” on page 120 for
instructions on how to copy an outgoing message
into the message editor.
To delete text in a message:
1. Press
M to scroll the cursor to the right of
the text you want to delete.
2. Press
C to delete one character at a time.
or
Press and hold C to clear the display.
To add text to a message:
1. Press M to scroll the cursor to the location
where you want to add new text.
2. Enter a letter by pressing a key as many
times as necessary.
Send a Message
To send a message from the message editor:
1. Press
O to access message editor menu
options.
2. Press
M until you see Send Message and then
press
O. You will be prompted to enter the
destination address or phone number for the
message.
3. Enter the destination address and then
press
O to send the message.
If the destination is a phone number, enter it
beginning with “00” or “+”. If the destination is
an email address, enter “00*2” or “+*2”.
11Message-kg.fm Page 116 Wednesday, November 3, 2004 9:37 PM
To Next Page
Loading...
