Iridium 9523 - Page 101

Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 101 of 115 to Product Developers
Only
Register
Number
Range Default Description
Sr=n Command
Write Protected
in SAC0201
5 = +CBST parameter <ce> setting
6 = +CRC setting
7 = +CR setting
S44 0-255 4 Bitmap register:
0-2 = +CPBS setting
5-6 = +CREG setting
7 = +CLIP setting
Yes
S45 0-255 0 Bitmap register:
0-1 = +CNMI parameter <mode> setting
2-3 = +CNMI parameter <mt> setting
4-5 = +CNMI parameter <bm> setting
6-7 = +CNMI parameter <ds> setting
Yes
S47 0-255 0 Bits 4,5, and 6 reflect TON settings for dial string
S49 0-255 1 Bits 0-3 reflect NPI settings for dial string
S51 0-255 0 V.42bis maximum codewords (P1), high byte Yes
S52 0-255 128 V.42bis maximum codewords (P1), low byte
S54 0-255 20 V.42bis maximum string size (P2)
S58 0-255 0 V.42bis compression direction (P0)
S96 0-255 0 IRLP version number (N0) parameter
S98 1-105 105 IRLP k iwf->isu parameter
S99 1-105 105 IRLP k isu->iwf parameter
S100 1-15 15 IRLP N2 parameter
S102 26-255 30 IRLP T1 parameter
S103 10-255 10 IRLP T2 parameter
S104 4-255 4 IRLP T4 parameter