Iridium 9523 - Page 102

Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 102 of 115 to Product Developers
Only
Register
Number
Range Default Description
Sr=n Command
Write Protected
in SAC0201
S106 1-10 10 IRLP riwf->isu parameter
S107 1-10 10 IRLP risu->iwf parameter
S112 0-255 0 SBD upload message sequence number (high byte) Yes
S113 0-255 0 SBD upload message sequence number (low byte) Yes
S121 0-31 1 Bitmap register:
bit 0: +SBDMTA setting (SBD ring indication)
bits 1-2: +SBDAREG setting (SBD automatic
registration)
bit 3: +CCWA<n> setting
bit 4: +GPSSTA<n> setting
Yes
S122 0-31 0 Bitmap register:
bit 0: unused:
bits 1-3: +CIER setting (indicator event reporting)
Yes
S123 0-255 8 Bitmap register:
bit 0: unused
bit 1 = +WTM
bit 2 = +WDLDM<dldm>
bit 3 = +WIRLP<mode>
bits 4-5 = +WFRNG
Yes
S124 0-255 15 Dynamic link measurement interval (+WDLM <mi>
setting). Value in 1000 ms unit.
S125 1-100 10 Dynamic link delay measurement delay tolerance
(+WDLM<dtl> setting). Value in % unit.
S126 0-255 2 Bitmap register:
0 = Ignore &Dn command specified reaction to
DTR ON to OFF transitions. Disconnect as
reaction to Hn command. OK response given.
1 = Ignore &Dn command specified reaction to
DTR ON to OFF transitions. Ignore Hn
Yes