Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 103 of 115 to Product Developers
Only
Register
Number
Range Default Description
Sr=n Command
Write Protected
in SAC0201
command. OK response given
2 = Comply with &Dn command specified reaction
to DTR ON to OFF transitions. Disconnect as
reaction to Hn command.
S127 0-255 0 Bitmap Register containing copies of MSVTR/MSVLS
parameters:
Bit 0 = –MSVTR: 0 = Disabled (default) 1 = Enabled
Bit 1 = –MSVLS: 0 = No Mute (default) 1 = Mute
Enabled
Bits 2-5 = Reserved (see IID#2600)
Yes
To Next Page
Loading...
