Iris Technology Operator's Manual
QuietPower 1800 (QP-1800) Doc 287.F701 / 100412
Page 13 of 56 Rev 12 APR 2010
Section 1
Introduction
1.1 Introduction
Thank you for your purchase of the QuietPower 1800 Inverter. As a high quality, true sine wave
output inverter, you can expect the QuietPower Inverter to deliver exceptional performance and
give you years of dependable operation. The true sine wave AC output from the QuietPower
Inverter ensures all AC loads operating from the unit perform efficiently and correctly. Since
these loads were designed to operate from true sine wave voltage, you can expect these loads
to operate the same as if operating from grid/utility supplied power. In some cases, the true
sine wave output from the QuietPower Inverter is superior to the power supplied by your utility
company.
To get the most out of your QuietPower Inverter, carefully read and follow the instructions in this
guide. Pay special attention to the Important Safety Instructions in this guide and to the
WARNING and CAUTION statements found throughout the guide and on the product. Please
retain all packaging.
Should you have any questions before, during, or after installation, please call Iris Technology's
Customer Service Department for help.
Customer Service (Toll Free): (866) 240-9540
Customer Service (Local): (949) 975-8410
Customer Service (Fax): (949) 975-8498
Customer Service (Email): support@iristechnology.com
Record the following information for use when contacting Iris for servicing of the unit.
QuietPower Serial #: ___________________________ (Required)
Date of purchase: ___________________________ (If Available)
Contract reference: ___________________________ (If Available)
To Next Page
Loading...
General