I A P 2 0 2 3 . 0 0 1 - A F M / I R I S T E X A N I I P A G E | 106
FOR SIMULATION USE ONLY ā NOT A TRAINING AID
alphanumeric data entry is in progress, if the RTN key is pressed for 1 second, or 20
seconds pass with no activity, the entered data is discarded and the display
navigates to the persistent display.
UFCP Master Modes
The integrated avionics system operates in one of three possible master modes:
NAV, air-to-air (A/A), or air-to-ground (A/G). A/A and A/G are disabled in the basic
student mode.
The master mode is selected using the NAV, A/A, or A/G hard keys on the panel. In
the advanced mode, pressing any of these three keys when not in the mode
associated with that key switches the UFCP into that master mode. If one of these
three keys is depressed when already in the mode associated with that key, the
system remains in that mode and displays the appropriate page.
The master mode selection affects the UFCP persistent display, HUD, and the MFDs.
UFCP Upper Panel Persistent Display
The UFCP persistent display is a default display in the basic mode. In the advanced
mode it is dependent on the master mode of the UFCP NAV, A/A, or A/G, and is used
to display the most important information for each master mode.
The persistent display is shown when the UFCP RTN key is pressed for 1 second or
after 20 seconds of inactivity on the UFCP.
To Next Page
Loading...