PERIODICAL
INSPECTION
TABLE
Check and service the machine in accordance with the table below for safe and efficient operation.
o Check, replenish, or adjust
6. Clean or wash
• Replace
Inspection intervals (operation hours)
Inspection items
Daily every
every every every
Remarks
25 h 50 h 100 h
300 h
Engine oil
0
•
t
Fuel and oil leakage
0
Dust and dirt on engine
6
Engine control
0
Air cleaner
Paper element
6
•
tt
Urethane foam
6
tt
element
Fuel filter
6.
Spark plug
0
Engine valve clearances
0
at ISEKI's authorized dealer
Cylinder cooling fins
6
Fasteners
0
Collector
0
Check for tears, fraying, clogging etc.
Blade-brake-c1utch
0 Check for operation
Travel-clutch
0 Check for operation
Speed shift mechanism
0 Check for operation
Control wires
0
Front wheels
0
Rear wheels and gears
0
Rear wheel bracket
0
at ISEKI's authorized dealer
and bushes
Transmission oil
0
•
at ISEKI's authorized dealer
t Change engine
oil
after the initialS hours
of
operation
and
then at eve/}' 50 hours
of
operation.
tt
More frequent service is required underdusty conditions.
LIST OF CONSUMABLE PARTS
(
(
Engine
Mower
Engine oil, air-cleaner elements, spark plug
Cutting blade, transmission oil, bushes, clutch lining
-58-
To Next Page
Loading...
