EasyManua.ls Logo

Iseki TXG23 - Indicator Light Strip; Hour Meter

Iseki TXG23
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
INSTRUMENTS & CONTROLS
Indicator Light Strip
FIG. 12: Indicator light strip contains several warning
lights to monitor certain functions. Currently used posi-
tions (from left to right) are:
Battery Charge (1) - Lights up when main switch is
turned "ON" and will go out after engine starts, to indicate
battery is being charged.
Engine Oil Pressure (2) - Lights up if engine oil pressure
is low. If the light comes on while engine is running, shut
off the engine immediately and investigate the cause.
Coolant Temperature (3) - Lights up when the engine is
overheated.
NOTE: When any of the indicator lights above stays lit,
stop the engine immediately and consult your
dealer.
Turn Indicator Lamps (4) - Blinks when the turn signal is
activated.
Hour Meter
FIG. 13: Hour meter indicates engine and tractor use to
assist in maintenance intervals. The extreme right digit
indicates 1/10 hour increments.
FIG. 12
FIG. 13

Table of Contents