Iseki TXG23 - Maintenance and Adjustment; Specifications and Capacities

SPECIFICATIONS & CAPACITIES
Engine Oil
Use ISEKI UTH (Shell DONAX TD), or equivalent in the appropriate SAE viscosity. Oil must meet of exceed; MILL-
46152 requirements, API Service "CC".
Capacity(Crankcase and filter) ……………………………………………………………………………………………2.6 liters
Recommended Viscosity:
78˚ F (25˚ C) and Above …………………………………………………………………………SAE 30 W, 10W - 30
32˚ - 78˚F (0˚ -25˚ C) ………………………………………………………………………………SAE 20 W, 10W - 30
Below 32˚ F (0˚ C) …………………………………………………………………………………SAE 10 W, 10W - 30
15W-40 may be used in ambient temperatures above -10˚ C
Recommended Change Intervals:
Initial Oil and Filter Change ……………………………………………………………………………………50 hours
Oil and Filter Change, Thereafter ……………………………………………………………………Every 150 hours
Engine Coolant
Freezing Protection (Original Factory Fill) …………………………………………………………………………………-34˚ C
Recommended Coolant ………………………………………………………………50/50 mixture ethylene glycol and water
System Capacity……………………………………………………………………………………………………………4.6 liters
Fuel Tank
Capacity………………………………………………………………………………………………………………………21 liters
Fuel recommended, Above 4˚ C …………………………………………………………………………………No.2 or No.2-D
Fuel recommended, Below 4˚ C …………………………………………………………………………………No.1 or No.1-D
Transmission & Differential Housing (Including Hydraulic System)
Capacity - US qts. (liters): ………………………………………………………………………………………………11.0 liters
Recommended Lubricant ……………………………………………………………………………………………SAE 80 GL-4
Recommended Change Interval: ………………………………………………………………First 50 hours, every 300 hours
Front Axle (4-WD Only)
Capacity ……………………………………………………………………………………………………4.2 U.S. qts (4.0 liters)
Recommended Change Lubricant …………………………………………………………………………………SAE 80 GL-4
Recommended Change Interval: …………………………………………………First 50 hours, every 600 hours thereafter
Grease Fittings
Grease Interval (All Fittings) ………………………………………………………………………………………Eveyr 50 hours
Recommended Grease ………………………………………………………………………………Lithium base grease No.2
NOTE: Change intervals stated above are for normal usage. Due to adverse operating conditions that may be experi-
enced (extremely dusty of muddy), change intervals may need to be more frequent.
48
TXG23
MAINTENANCE & ADJUSTMENT