ISHIDA IGB Series - Weighing

2.1 Presetting the Values
page 12 IGX/IGB Series Operation Manual No. 0202A
8
Increase or decrease the numeric value by pressing the ZERO (+) or TARE (-) key. Then,
press the COLUMN key to determine the value. Repeat this step until completing the entry.
[Example] Upper limit value 1000g
or
Ä Ä
IGX Series IGB Series
Setting the Lower Limit Value
9
Press the SET key to determine the upper limit value and move to the display for setting the
lower limit value.
Move the flashing digit to the desired position by pressing the COLUMN key.
NOTE If the lower limit value has already been preset, only a value equal to or larger than
this limit value can be set.
IGX Series IGB Series
Ä