ISHIDA Uni-5 User Manual

Chapter 10 PROGRAM MODE
UNI-5 User’s Manual 10-107
10.18.2 CHANGING EXISITING TABLES
1.
Press the "Lookup Table” field on the Program Menu Select screen.
2.
The Lookup Table screen appears.
3.
Select a desired header table by pressing the corresponding field.
EXAMPLE Table number “2”.
or press the [PLU] key on the key sheet after a numeric entry.
Î

ISHIDA Uni-5 Specifications

General

Brand	ISHIDA
Model	Uni-5
Category	Scales
Language	English