Chapter 11 SETUP MODE
7.
Press the “DATE” tab to display the Item Initial Data (Date) screen.
ITEM DESCRIPTION
PACK DATE
PRINT
Press to select whether or not to print pack date.
Press the [<] or [>] button to select a desired printing method.
PACK TIME
PRINT
0: No print
1: Designated time
2: System clock time
PACK TIME
DATA
Enter a desired pack time and press this field.
SB DATE PRINT Press to select whether or not to print sell-by date.
Press the [<] or [>] button to select a desired printing method.
SB TIME PRINT
0: No print
1: Designated time
2: Relative time
SB TIME DATA Enter a number of “Time After” for sell-by time and press this field.
SHELF LIFE
(DAYS)
Enter a number of days for shelf life and press this field.
UB DATE PRINT Press to select whether or not to print use-by date.
UB DATE DATA Enter a number of days for use-by date and press this field.
8.
Press the “DATE” tab to display the Item Initial Data (Date) screen.
ITEM DESCRIPTION
ITEM CODE Enter an item code and press this field.
REGI CODE Enter a register code and press this field.
POS FLAG Enter a POS flag number and press this field.
BARCODE Enter a barcode and press this field.
Press the [<] or [>] button to select a desired reference method.
POS REFERENCE
0: Refer
1: PLU file
UNI-5 User’s Manual 11-27
To Next Page
Loading...
Need help?
General
