Isokern IBV-36 - Required Component List

8
Required Component List
InadditiontothestandardIBVmodularmasonryreboxandsmokedomeassemblycomponentstheIBVrequiresparticular
components necessary to complete the installation and meet the ANSI Z-21.50 listing. The two boxes of special IBV components
include the following:
IBV Box 1 of 2:
1. One (1) B-Vent Installation, Operation, Maintenance and Owner’s Manual
2. One (1) metal canopy/wiring raceway with 4 mounting screws with high temperature limit switch and damper macro switch/
lever assembly pre-mounted. Warning stickers attached.
3. Two (2) high temperature wires, twelve feet long (12’)
IBV Box 2 of 2:
1. One (1) 10” anchor plate / down draft diverter / B-Vent starter collar/in-line damper combination unit with 4 mounting
screws
3. One (1) C-Clamp warning label
2.One(1)ceramicberblanket24”x24”x1/2inchthick