Introduction
Thank you for purchasing the iStorage datAshur
®
Personal
2
, a highly secure and easy to use, hardware encrypted USB 3.0
PIN activated flash drive.
The datAshur Personal
2
uses military grade XTS-AES 256-bit hardware encryption, which encrypts all data stored on the
drive in real-time. The datAshur Personal
2
requires no software and is OS and host independent.
The datAshur Personal
2
incorporates a rechargeable battery allowing the user to enter a 7-15 digit PIN (Personal Identification
Number) onto the on-board keypad before connecting the drive to a USB port.
Should the drive be lost or stolen, the user can rest assured that all data held on the datAshur Personal
2
is safe and cannot be
accessed by any unauthorised person.
The datAshur Personal
2
can be configured with both a User and Admin PIN, making it perfect for corporate and government
deployment. As the datAshur Personal
2
is unlocked via the onboard keypad and not a host computer, it is not vulnerable to
software/hardware based key-loggers or brute force attacks.
Package contents
• iStorage datAshur Personal
2
• QSG - Quick Start Guide
Note: The datAshur Personal
2
rechargeable battery is not fully charged, we recommend the battery be
charged prior to first use. Please plug in the datAshur Personal
2
to a powered USB port for 60
minutes to fully charge the battery.
Caution: The datAshur Personal
2
is shipped with a default User PIN of 1-1-2-2-3-3-4-4
and although it can be used straight out of the box with the default PIN, for security reasons, we
highly recommend that a new User PIN be created immediately by following instructions under
section 4 “How to change User PIN”.
If you forget your User PIN and no Admin PIN exists, or you forget both PINs, all data will be inaccessible.
To Next Page
Loading...
Need help?
General