iStorage Datashur Personal2 User Manual

#13
www.istorage-uk.com
iStorage datAshur
®
Personal
2
Manual – v 1.3
DATA ASSURED
#13
www.istorage-uk.com
16. How to enable Read-Only in Admin mode
Instructions LED LED State
1. Unlock the datAshur Personal
2
with Admin PIN
Red solid LED followed by a flickering Green
LED indicating successful Admin PIN entry
2. Press the KEY button three times
(triple-click)
&
Green and Blue LED’s flicker together
3. Within 10 seconds begin to press the number 7 (pqRs)
button followed by the number 6 (mnO) button (76)
&
Green and Blue LED’s continue to flicker
together
4. Press KEY button once
Blue LED quickly fades out and Green LED con-
tinues to flicker. when the datAshur Personal
2
is
inserted into a USB port the Green LED blinks
every two seconds indicating the datAshur
Personal
2
is in Read-Only mode
17. How to enable Read/Write in Admin mode
When Admin writes content to the datAshur Personal
2
and restricts access to read-only, the User cannot change this setting
in User mode. To set the datAshur Personal
2
to Read-Only, please follow the steps below.
Admin can override User set Read-Only by enabling Read/Write on the datAshur Personal
2
using the Admin PIN. To set the
datAshur Personal
2
to Read/Write, please follow the steps below.
15. How to verify whether an Admin/User PIN has been set up
1. Press KEY button once Red, Green & Blue LED’s will flash together once, then one of the following states occurs.
Only User/default PIN exists
Red LED blinks
Only Admin PIN exists
Blue LED blinks
Both User and Admin PIN’s exist
&
Red and Blue LED’s blink together
The following table illustrates how to determine which PINs, User and/or Admin, have been set up.
With the datAshur Personal
2
in a locked state (all LEDs off), press the KEY button once.
Caution: Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.
Caution: Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.

iStorage Datashur Personal2 Specifications

General

Brand	iStorage
Model	Datashur Personal2
Category	Storage
Language	English