1. datAshur Personal
2
Layout
2. LED indicators and their actions
LOCK LED, stand by while the drive is locked
UNLOCK LED, drive is unlocked when ashing
Keypad
Key Button, used to activate the drive and to enter PIN codes
BLUE LED, when solid, the drive is connected to the computer, when
ashing data is being transferred.
LED LED State Description LED LED State Description
Red blinks every
3 seconds
No User or Admin PIN has been
defined. A new User or Admin PIN
will need to be created.
Blue Blinking
Data exchange with host/changing
User PIN/when not connected to a
USB port indicates an Admin PIN
exists
Red - Fade Out
Locking down/incorrect PIN entry
/
Red and Green
blinking alternately
Factory reset/deleting files in Admin
mode
Red blinking Locked and awaiting factory default
PIN or User defined PIN entry
&
Red and Green
flickering together
Awaiting Admin PIN entry
Green Solid datAshur Personal
2
is unlocked in
User mode
&
Green and Blue
blinking together
User Options mode
Green blinking
When connected to a USB port if
Green Led blinks every 2 seconds
this indicates the datAshur Person-
al
2
has been set as ‘Read-Only’
&
Green and Blue
flickering together
Admin Options mode
Green flickering datAshur Personal
2
is unlocked in
Admin mode
&
Red and Blue
blinking together
When not connected to a USB port
indicates that both User and Admin
PINs have been set on the
datAshur Personal
2
Blue Solid
Connected to a USB port
&
Red and Blue
flickering together
Awaiting Admin PIN change
To Next Page
Loading...
Need help?
General