iStorage Datashur Personal2 User Manual

#8
iStorage datAshur
®
Personal
2
Manual – v 1.3
www.istorage-uk.com
DATA ASSURED
6. How to enable Read-Only as User
7. How to enable Read/ Write as User
Instructions LED LED State
1. Unlock the datAshur Personal
2
with User PIN
Red solid LED changing to Green solid LED
indicating successful User PIN entry
2. Enable Options by pressing the KEY button 3 times -
triple click
&
Green and Blue LED’s blinking together
awaiting new instructions in OPTIONS mode.
3. Within 10 seconds begin to Press button number 7
(pqRs) followed by the number 6 (mnO) button - (76)
&
Green and Blue LED’s continue to blink together
4. Press KEY button once
Blue LED quickly fades out to a solid Green.
When the datAshur Personal
2
is inserted into a
USB port the Green LED blinks every two sec-
onds indicating the drive is in Read-Only mode
The User is able to write content to the datAshur Personal
2
and restrict access to read-only.
This is done by performing the following steps.
Once activated, access is limited to Read-Only until write protect is disabled.
Note: We have applied a naming convention to make it easy for the User to remember the keystrokes for each
optional setting. In the table above we have used numbers that represent the ‘first letters’ of the optional feature
name. For example, Read-Only = 7 (pqRs) 6 (mnO).
Admin can override User Read/Write settings by enabling/disabling Read/Write in Admin mode.
Instructions LED LED State
1. Unlock the datAshur Personal
2
with User PIN
Red solid LED changing to Green solid LED
indicating successful User PIN entry
2. Press the KEY button three times (triple-click)
&
Green and Blue LED’s blinking together
3. Within 10 seconds begin to Press the number 7 (pqRs)
button followed by the number 9 (Wxyz) button (79)
&
Green and Blue LED’s continue to blink together
4. Press KEY button once
Blue LED quickly fades out to a solid Green.
When the datAshur Personal
2
is inserted into a
USB port a solid Green LED indicates the drive
is Read/Write enabled
Restricted write protect (Read-Only) access can be turned off with access restored to Read/Write.
This is done by performing the following Steps.
Once activated, access is restored to the default Read/Write state.
Note: Admin can override User Read/Write settings by enabling/disabling Read/Write in Admin mode.

iStorage Datashur Personal2 Specifications

General

Brand	iStorage
Model	Datashur Personal2
Category	Storage
Language	English