ITech IT-M3140 Series User Manual

Quick Reference
Off Turn the OCP function off.
On Turn the OCP function off.
Level Over-current limit.
Delay Delay time.
OPP
Over-power protection.
Off Turn the OPP function off.
On Turn the OPP function on.
Level
Over-power limit.
Delay Delay time.
UVP
Under-voltage protection.
Off Turn the UVP function off.
On Turn the UVP function on.
Level
Under-voltage limit.
Delay Delay time.
Warm up Warm-up time.
UCP
Under-current protection.
Off Turn the UCP function off.
On Turn the UCP function on.
Level Under-current limit.
Delay Delay time.
Warm up Warm-up time.
FOLDBACK
Set up foldback function
Off Turn off the FOLDBACK function
CC
Foldback protection is triggered when the
power loop is switched to CC.
Delay: delay time
CV Foldback protection is triggered when the
power loop is switched to CV.
Delay: delay time
1.7.4 Advanced Function Menu Reference
Press [Shift]+[I-set] (Function) to enter into the function menu interface.
The main functions of function menu are listed in the table below. Please refer
to the corresponding sections for the detailed information about each function.
Copyright © Itech Electronic Co., Ltd.
13

ITech IT-M3140 Series Specifications

General

Brand	ITech
Model	IT-M3140 Series
Category	Power Supply
Language	English