ITech IT-M3140 Series - System Settings and Operations

Functions and Features
2. Use left and right keys or rotate the knob to select System Reset and press
[Enter] key to make the parameter in modification.
3. Use left and right keys or rotate the knob to select the value from the follow-
ing options.
• No: default value, indicates the power supply cancels this menu setting.
• Yes: indicates the power supply restores the factory default settings.
4. After finishing the setting, press [Enter] key to confirm.
The detailed default parameters are listed in the following table.
No. Parameter Default Value
The setting values on the front panel
1
Voltage
0
2 Current 0.1A
Config menu
1 P-SET MAX
2 Mode
CV Priority
3 V-Rise Time 0.1S
4 V-Fall Time 0.1S
5
Output Res
0.0mΩ
6 I-Rise Time 0.1S
7 I-Fall Time 0.1S
8 Timer Off
9 Time 1.0 S
10
On Delay
0.000 S
11
Off Delay
0.000 S
System menu
1
Beep
On
2 Power On Reset
3 Sense Off
4 USB mode TMC
5 IP Addr 192.168.200.100
6 Sub Net 255.255.255.0
Copyright © Itech Electronic Co., Ltd.
46