ITech IT-M3140 Series - Technical Specifications; Main Performance Specifications

Technical Specification
Parameter IT-M3146
Current ≤0.1% + 0.1%F.S.
Power ≤0.5%F.S.
Ripple（20hz-20Mhz）
Vp-p typical value≤1V(MAX: ≤1V)
Irms
typical value≤6MA(MAX: ≤6MA)
Setting Temperature Coeffi-
cient (％of Output+Offset)/
℃
Voltage
≤20PPM/℃
Current ≤50PPM/℃
Readback Temperature Co-
efficient (％of Output+Off-
set)/℃
Voltage
≤20PPM/℃
Current ≤50PPM/℃
Rise Time( no load ) Voltage
≤60MS
Rise Time( full load ) Voltage
≤150MS
Fall Time( no load ) Voltage
≤5S
Fall Time( full load ) Voltage
≤200MS
Transient Response Time Voltage
≤1MS
AC Input
Voltage
220V±20% (3000W)
110V±10% (derating to 1500W)
Frequency
50/60Hz
Setup stability-30min (％of
Output +Offset)
Voltage
0.01%+60mV
Current 0.04%+2mA
Setup stability-8h (％of Out-
put +Offset)
Voltage
0.01%+100mV
Current 0.04%+3mA
Readback stability-30min
(％of Output +Offset)
Voltage
0.01%+60mV
Current 0.04%+2mA
Readback stability-8h (％of
Output +Offset)
Voltage
0.01%+100mV
Current 0.04%+3mA
Efficiency
91%
Remote Sense Compensation Voltage
≤6V
Command Response Time
5ms
Power Factor 0.99
Maximum Input Current
20A
Maximum Input Apparent Power
3700kVA
Storage Temperature
-10℃～70℃
Protective Function
OVP, OCP, OTP, OPP, UVP, UCP, Sense reverse
connection protection
Copyright © Itech Electronic Co., Ltd.
78