ITech IT-M3140 Series User Manual

Technical Specification
Parameter IT-M3131E
Current ≤0.1% + 0.1%F.S.
Power ≤0.5%F.S.
Ripple（20hz-20Mhz）
Vp-p typical value≤70MV(MAX: ≤70MV)
Irms
typical value≤150MA(MAX: ≤150MA)
Setting Temperature Coeffi-
cient (％of Output+Offset)/
℃
Voltage
≤20PPM/℃
Current ≤50PPM/℃
Readback Temperature
Coefficient (％of Output
+Offset)/℃
Voltage
≤20PPM/℃
Current ≤50PPM/℃
Rise Time( no load ) Voltage
≤60MS
Rise Time( full load ) Voltage
≤150MS
Fall Time( no load ) Voltage
≤2S
Fall Time( full load ) Voltage
≤200MS
Transient Response Time Voltage
≤1MS
AC Input
Voltage
220V±20% (1850W)
110V±10% (derating to 1500W)
Frequency
47-63Hz
Setup stability-30min (％of
Output +Offset)
Voltage
0.01%+1mV
Current 0.03%+50mA
Setup stability-8h (％of Out-
put +Offset)
Voltage
0.01%+2mV
Current 0.03%+55mA
Readback stability-30min
(％of Output +Offset)
Voltage
0.01%+1mV
Current 0.03%+50mA
Readback stability-8h (％of
Output +Offset)
Voltage
0.01%+2mV
Current 0.03%+55mA
Efficiency
90%
Remote Sense Compensation Voltage
≤3V
Command Response Time
5ms
Power Factor 0.99
Maximum Input Current
18A
Maximum Input Apparent Power
2300kVA
Storage Temperature
-10℃～70℃
Protective Function
OVP, OCP, OTP, OPP, UVP, UCP, Sense reverse
connection protection
Copyright © Itech Electronic Co., Ltd.
82

ITech IT-M3140 Series Specifications

General

Brand	ITech
Model	IT-M3140 Series
Category	Power Supply
Language	English