To Next Page

To Previous Page

Basic Operation

Category

Parameter

Main interface

(Load Mode)

Voltage setting under CV mode: Vs

Current setting under CC mode: Is

Power setting under CW mode: Ps

Resistance setting under CR mode: Rs

Voltage setting and current setting under CVCC mode: Vs

and Is

Voltage setting and resistance setting under CVCR mode:

Vs and Rs

Current setting and resistance setting under CRCC mode:

Is and Rs

Voltage setting, current setting, resistance setting and

power setting under AUTO mode: Vs, Is, Ps and Rs

Config Menu

(Load Mode)

Operation mode

I-Rise Slope

I-Fall Slope

Von function mode and level

You can do the save and recall operations by the following two methods.

• Press the composite keys [Shift]+[+/-] (Save) to save the parameters. Press

the composite keys [Shift]+[0] (Recall) to recall the parameters.

• SCPI commands: *SAV and *RCL

6.3.1 Save Operation

The save operation procedures are as follows:

1. Press the composite keys [Shift]+[+/-] (Save) to enter the parameter save

interface.

140

ITech IT6005B-80-120 User Manual

Questions and Answers: