Quick Reference
Config Configuration menu of the load
Mode
Set the operation mode
CC
Constant current operation mode
CV
Constant voltage operation mode
CW
Constant power operation mode
CR
Constant resistance operation mode
CVCC
CV+CC complex operation mode
CVCR
CV+CR complex operation mode
CCCR
CC+CR complex operation mode
AUTO
CC+CV+CW+CR complex operation
mode
On Delay Set the delay time to turn on the input.
Off Delay Set the delay time to turn off the input.
I-Rise Slope
Set the current rising time. (only displayed
under the CC Mode)
I-Fall Slope
Set the current falling time. (only displayed
under the CC Mode)
V-Rise Slope
Set the voltage rising time. (only displayed
under the CV Mode)
V-Fall Slope
Set the voltage falling time. (only displayed
under the CV Mode)
P-Rise Slope
Set the power rising time. (only displayed
under the CP Mode)
P-Fall Slope
Set the power falling time. (only displayed
under the CP Mode)
Von Set Von function
Latch Latch mode
Level=0.00V Set the Von value
Living Living mode
Level=0.00V Set the Von value
Copyright © Itech Electronic Co., Ltd.
14
To Next Page
Loading...
Need help?
General
