Battery Charge and Discharge Statistic Command
Copyright© Itech Electronics Co., Ltd. 95
Chapter13 Battery Charge and Discharge
Statistic Command
BATTery:CAPacity:CLEar
This command is used to clear battery charge and discharge capacity.
Command syntax
BATTery:CAPacity:CLEar
Arguments
NONE
Example
BATT:CAP:CLE
FETCh:BATTery:CAPacity[:CHARge]?
This command is used to obtain battery charge capacity.
Command syntax
FETCh:BATTery:CAPacity[:CHARge]?
ReturnsUnit
AH
Returns:
NRf
Example
FETC:BATT:CAP? ->3.00
FETCh:BATTery:CAPacity:DISCharge?
This command is used to obtain battery discharge capacity.
Command syntax
FETCh:BATTery:CAPacity:DISCharge?
ReturnsArguments
AH
Returns
NRf
To Next Page
Need help?
General
