ITech IT6513C - [Source:]Sense:rverse:protect[:State]

Output Commands
Copyright© Itech Electronics Co., Ltd. 47
[SOURce:]SENSe:RVERse:PROTect[:STATe]
This command is used to set the status of sense reverse protection.
Command syntax
[SOURce:]SENSe:RVERse:PROTect[:STATe] <bool>
Arguments
0|1|OFF|ON
Query syntax
[SOURce]SENSe:RVERse:PROTect[:STATe]?
Returns
<0|1>