To Next Page

To Previous Page

SCPI Command Description

SYSTem:RWLock

This command is transmit through RS232 interface, the same function as

SYSTem:REMote, but the difference is: this command can lock “ LOCAL

“ button as well. When this command is executed, the “ Local “ button

can’t switch to local control mode.

Command syntax

SYSTem:RWLock

Arguments

None

Example:

SYST:RWL

SYSTem:COMMunicate:SELect

This command is used to select the communication interface.

Arguments

RS232|USB|GPIB|LAN

Example

SYST:COMM:SEL RS232

Query syntax

SYSTem:COMMunicate:SELect?

Returns

RS232|USB|GPIB|LAN

SYSTem:COMMunicate:GPIB:ADDRess

This command is used to set the address of GPIB interface.

Command syntax

SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>

Arguments

<1-30>

Reset Value

Query syntax

SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?

ITech IT6513C Manual

Other manuals for ITech IT6513C