ITech IT6513C Manual

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 71
CARWave:ISO16570:STARtup:PROFile[:STATe]
This command is used to analog ISO startup wave of car.
Command syntax
CARWave:ISO16750:STARtup:PROFile:STATe
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARW:ISO16750:STAR:PROF 0
Query syntax
CARWave:ISO16750:STARtup:PROFile?
Returns
0|1
CARWave:ISO16750:STARtup:PROFile:VOLTage[:LEVel]
This command is used to select ISO startup wave voltage of car.
Command syntax
CARWave:ISO16750:STRTtup:PROFile:VOLTage <12V|24V>
Arguments
12V|24V
Reset Value
12V
Example
CARW:ISO16750:STAR:PROF:VOLT 12V
Query syntax
CARWave:ISO16750:STARtup:VOLTage?
Returns
<CRD>
CARWave:ISO16750:STARtup:PROFile:INDex
This command is used to select ISO startup wave level of car.

ITech IT6513C Specifications

General

Brand	ITech
Model	IT6513C
Category	Power Supply
Language	English