ITech IT6513C Manual

TraceRelated Command(IT6500C)
Copyright© Itech Electronics Co., Ltd. 106
Chapter16 TraceRelated Command(IT6500
C)
In the sub-system, this command is used to configure and control data save in
cache.
TRACe:CLEar
This command is used to clear reading cache. If cache is not cleared,
subsequent saving will overwrite the previous data.
Command syntax
TRACe:CLEar
Arguments
NONE
Example
TRAC:CLE
TRACe:POINts
This command is used to specify cache size.
Command syntax
TRACe:POINts <2 to 2500|MINimum|MAXimum|DEFault>
Arguments
2 to 2500|MINimum|MAXimum|DEFault
Returns
NR1
Example
TRAC:POIN 10
Query syntax
TRACe:POINts? [MINimum|MAXimum|DEFault]
Returns
<NR1>
TRACe:FEED:CONTrol
This command is used to select cache control. Select NEVer, Save to Cache is
disabled; select NEXT, save process starts and will stop when the cache is
filled in. Select ALWays. After cache is filled in, circulate the cache.

ITech IT6513C Specifications

General

Brand	ITech
Model	IT6513C
Category	Power Supply
Language	English