To Next Page

To Previous Page

SCPI Command Description

Returns

NR1

SYSTem:COMMunicate:SERial:BAUDrate

This command is used to set the baudrate of RS232.

Command syntax

SYSTem:COMMunicate:SERial:BAUDrate<4800|9600|19200|38400|57600|11

5200>

Arguments

4800|9600|19200|38400|57600|115200

Example

SYSTem:COMM:SER:BAUD 4800

Query syntax

SYSTem:COMMunicate:SERial:BAUDrate?

Returns

<NR1>

SYSTem:COMMunicate:LAN:CURRent:ADDRess

This command is used to set IP address of power supply.

Command syntax

SYSTem:COMMunicate:LAN:CURRent:ADDRess <STR>

Arguments

<STR>

Unit

None

*RST

192.168.0.200

Example

SYST:COMM:LAN:CURR:ADDR "192.168.0.200"

Query syntax

SYSTem:COMMunicate:LAN:CURRent:ADDRess?

Returns

<STR>

ITech IT6513C Manual

Other manuals for ITech IT6513C