ITech IT6513C - Short voltage drop; Reset Test

Output Commands
Copyright© Itech Electronics Co., Ltd. 39
[SOURce:]POWer:RISE[:LEVel]
This command is used to set rising time of power.
Command syntax
[SOURce:]POWer:RISE[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
S
Example
POW:RISE 5.0
Query syntax
[SOURce:]POWer:RISE[:LEVel]? [MINimum|MAXimum]
Returns
NRf
[SOURce:]POWer:FALL[:LEVel]
This command is used to set falling time of power.
Command syntax
[SOURce:]POWer:FALL[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
S
Reset Value
0.001
Example
POW:FALL 3.0
Query syntax
[SOURce:]POWer:FALL[:LEVel]? [MINimum|MAXimum]
Returns
NRf