ITech IT6513C Manual

SCPI Command Description
Copyright© Itech Electronics Co., Ltd. 21
Returns
<STR>
SYSTem:COMMunicate:LAN:DHCP[:STATe]
This command is used to set Dynamic IP address of power supply.
Command syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe] <bool>
Arguments
0|1|OFF|ON
Reset Value
0
Example
SYST:COMM:LAN:DHCP 1
Query syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Returns
0|1
SYSTem:COMMunicate:LAN:SOCKetport
This command is used to set socket port of communication.
Command syntax
SYSTem:COMMunicate:LAN:SOCKetport <NR1>
Arguments
<NR1>
Unit
None
*RST 值
30000
Query syntax
SYSTem:COMMunicate:LAN:SOCKetport?
Returns
<NR1>

ITech IT6513C Specifications

General

Brand	ITech
Model	IT6513C
Category	Power Supply
Language	English