ITech IT7324 Programming Guide

Measurement Commands
Copyright © Itech Electronic Co., Ltd. 36
Command syntax
MEASure[:SCALar]:VOLTage[:AC]?
Returns
<NR2>
MEASure[:SCALar]:CURRent[:AC]?
This command is used to read the current current output value.
Command syntax
MEASure[:SCALar]:CURRent[:AC]?
Returns
<NR2>
MEASure[:SCALar]:POWer[:AC][:REAL]?
This command is used to read the current output active power value.
Command syntax
MEASure[:SCALar]:POWer[:AC][:REAL]?
Returns
<NR2>
MEASure[:SCALar]:POWer[:AC]:APParent?
This command is used to read the current output apparent power value.
Command syntax
MEASure[:SCALar]:POWer[:AC]:APParent?
Returns
<NR2>
MEASure[:SCALar]:POWer[:AC]:PFACtor?
This command is used to read the current output power factor value.
Command syntax
MEASure[:SCALar]:POWer[:AC]:PFACtor?
Returns
<NR2>

ITech IT7324 Specifications

General

Brand	ITech
Model	IT7324
Category	Power Supply
Language	English