ITech IT7324 Programming Guide

Measurement Commands
Copyright © Itech Electronic Co., Ltd. 34
Chapter9 Measurement Commands
FETCh[:SCALar]:VOLTage[:AC]?
This command is used to read the most recent preprocess voltage reading.
Command syntax
FETCh[:SCALar]:VOLTage[:AC]?
Returns
<NR2>
FETCh[:SCALar]:CURRent[:AC]?
This command is used to read the latest preprocessing current reading. After
this command is issued and the instrument talks, the readings are sent to the
PC. This command does not affect the instrument settings, does not trigger the
measurement operation, only reads the most recently available readings. This
command returns the old readings until a new reading is made.
Command syntax
FETCh[:SCALar]:CURRent[:AC]?
Returns
<NR2>
FETCh[:SCALar]:POWer[:AC][:REAL]?
This command is used to read the most recent active power reading.
Command syntax
FETCh[:SCALar]:POWer[:AC][:REAL]?
Returns
<NR2>
FETCh[:SCALar]:POWer[:AC]:APParent?
This command is used to read the most recent apparent power reading.
Command syntax
FETCh[:SCALar]:POWer[:AC]:APParent?

ITech IT7324 Specifications

General

Brand	ITech
Model	IT7324
Category	Power Supply
Language	English