ITech IT7622 User Manual

Technical Specifications
Copyright ©ITECH Electronic Co., Ltd. 84
Resolution 1°
Accuracy
±1°(45-65Hz)
*5
Frequency
Range
10-5KHz
Resolution
0.1Hz
Accuracy ±0.1%+0.1Hz(45Hz-999.9Hz)/±0.1%+1Hz(1KHz-5KHz)
*4
Other
Protection
OVP, OPP, OCP, OTP
Interface
GPIB, USB, LAN, RS232, CAN
Memory
10 groups
Dimension
(WxHxD)
24u
*1
: Preconditions for voltage accuracy: Slow loop speed: 10-100Hz; Fast loop
speed: 10-5KHz.
*2
: FS=full scale: Irms=72A; Ipk=216A;P=9000VA;
*3
: The minimum voltage of THD test is 10Vac
The maximum distortion test is carried out by outputting the maximum current
to linear load under 125Vac (Auto mode) and 250Vac (300V mode).
*4
: The test frequency accuracy should ensure that the minimum voltage is
30Vac.
*5
: Testing premise is in Fast mode
*6
: The minimum voltage setting must not be less than 50Vdc.
*7
: FS=full scale: Vdc=400Vdc;Idc=36A;P=4500W;
*8
: The maximum current range is 90% in the parallel mode.
Parameter IT7628 V1.4
AC Input
Voltage
380Vac±10%(Y)
Phase
3φ
Frequency
10-5kHz
Max.Current
120A
Power Factor
0.7(typical)
AC Output
Output phase
1φ or 3φ
Max.output power
18KVA
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

ITech IT7622 Specifications

General

Brand	ITech
Model	IT7622
Category	Power Supply
Language	English