What to do if ITRON FC300 Handhelds touchscreen is not accepting stylus taps?
- CcmaynardJul 26, 2025
Press + to force the Start Menu to appear. Use the tab, back-tab and cursor keys to move the cursor from element to element.
What to do if ITRON FC300 Handhelds touchscreen is not accepting stylus taps?
Press + to force the Start Menu to appear. Use the tab, back-tab and cursor keys to move the cursor from element to element.
Safety warnings and precautions related to the laser system on the FC300.
Diagrams and details of important labels and their compliance information.
Steps for physical setup and connecting accessories to the FC300.
Configuration steps for the FC300's software settings.
Instructions for connecting, removing, and hotswapping the FC300 battery pack.
Specific procedures for battery management in hazardous environments.
Explanation of all status LEDs on the FC300 and their meanings.
Details for System, Battery Charging, and Bluetooth Status LEDs.
Guide for connecting the FC300 to a host via USB and power.
Guide for connecting the FC300 to a client device via USB and power.
Guide for connecting the FC300 to a serial device and power.
Steps to connect the FC300 to an external AC power supply.
Instructions for powering the FC300 via a vehicle cradle.
Guide for connecting the headset and microphone to the FC300.
How to adjust the headset microphone and secure the cable.
Procedure for connecting a scanner via a tethered serial cable.
Steps for securely attaching the handstrap to the FC300.
Instructions for placing the FC300 into its carry case.
How to set the date, time, and time zone on the FC300.
Using the on-screen keyboard for data entry.
Configuring device power saving timers.
How to adjust the FC300's speaker volume.
Procedure to recalibrate the touchscreen for accurate input.
Adjusting display brightness and backlight timer.
Instructions for applying a protective film to the touchscreen.
Recommended methods for cleaning the FC300 device.
How to switch between locked applications using the switchpad.
Steps for pairing and connecting Bluetooth devices to the FC300.
Explains taskbar and LED indicators for Bluetooth status.
Procedures for rebooting and performing a warm boot.
Solutions for common problems like date/time, touchscreen, and battery life.
General compliance information including FCC, Industry Canada, and WEEE.
Specific RF compliance, safety, and R&TTE directive requirements.
Safety guidelines for using the AC power adapter.
Warnings and safety precautions for laser light usage.
Critical safety warnings for using the device in hazardous areas.