14 Adjust Headset / Microphone and Secure Cable
Adjust Headset / Microphone and Secure Cable
The headset consists of an earpiece, a microphone, a clothing clip and a cable. The headset attaches to the
audio cable end of the voice cable which attaches to the FC300.
Align the audio connector and the headset quick connect cable end. Firmly push the cable ends together until
they click and lock in place.
Do not twist the microphone boom when adjusting the microphone. The microphone should be adjusted to be
about two finger widths from your mouth.
Make sure the microphone is pointed at your mouth. Note the small “Talk” label near the mouthpiece. Make
sure the Talk label is in front of your mouth. The microphone cable can be routed over or under clothing.
Under Clothing
● Leave the cable exposed only at the top of the collar.
● Be sure to leave a small loop of cable to allow movement of your head.
Over Clothing
● Use clothing clips to hold the cable close to your body.
● Tuck the cable under the belt, but leave a small loop where it goes under the belt.
● Do not wear the cable on the front of your body. It may get in your way or get caught on protruding
objects.
WH-FC300USER-001 FC300 User Guide
For Review - Do Not Distribute - LXE Confidential
To Next Page
Loading...
Need help?
General