Name: ITRON FC300
Brand: ITRON
Rating: 4 (1 reviews)

To Next Page

To Previous Page

9 Connecting Cables to the FC300

Connecting Cables to the FC300

Note: Do not connect or disconnect cables in a Hazardous location.

Connecting the USB Host and Power Cable

Prerequisite : AC/DC Adapter, Assembled

Note: Do not connect AC power to the AC Adapter yet.

Host Cable Assembly

1. Holding the cable I/O connector, pinch the catch release buttons in until the catches are open. Connect

the cable to the FC300 I/O port by matching the shape of the I/O connector on the cable with the shape

of the I/O connector at the base of the FC300. Release the catch release buttons.

2. Insert the AC adapter single pin cable (2).

3. Connect the AC Adapter to a power source (wall outlet).

4. Insert the USB host plug (3) into the USB Host port.

The FC300 and the host device are connected.

WH-FC300USER-001 FC300 User Guide

For Review - Do Not Distribute - LXE Confidential

Other manuals for ITRON FC300

Questions and Answers:

Need help?

Do you have a question about the ITRON FC300 and is the answer not in the manual?

General