ITRON Gen 5 500W ERT - Page 29

4. Slide the 500WERTModule lug slot onto the mounting screw, pushing the
500WERTModule upward until the screw head is all the way into the slot.
5. Screw the 500WERTModule to the wall using the remaining two mounting screws.
6. Insert a tamper seal over each mounting screw and drive into place with a nut driver or a
similar tool.
Gen5 500WERTModule Remote Installation Guide 3 Setting up and Installing
December 5, 2022 LDI-0343 REV002 Itron, Inc. Page 29 of 48