93
10.1. Logbook contents
The following table contains a list of selectable logbook events (these may change due to meter firmware
revision):
Event Description
PERIODICAL EOI Periodical end of integration period
ASYNCHRONOUS EOI Asynchronous end of integration period
PERIODICAL EOB Periodical end of billing period
PROGRAMMED EOB Pre-programmed end of billing period
ASYNCHRONOUS EOB Asynchronous end of billing period
INDEX_DPM Change of index (from index table)
RESTORE_INTERNAL_INDEX Prompt for restoring internal index
DAY_PROFILE_CL Change of current day profile
RESTORE_INTERNAL_DAY_PROFILE Restoring internal current day
SEASON_SM Change of current season
RESTORE_INTERNAL_SEASON Restoring internal current season
DST_WITH_SEASON Change of current season (linked to DST)
ENTER_DOWNLOAD_MODE Enter the download mode
SAVE_MANUFACTURER_PARAMETERS Backup manufacturing parameters
ASSOCIATION_LN_PROGRAMMING Programming action
INDEX_PARAMETER Index
NON_FATAL_ALARM_APPEARANCE Appearance of a non-fatal alarm
NON_FATAL_ALARM_DISAPPEARANCE Disappearance of a non-fatal alarm
FATAL_ALARM_APPEARANCE Appearance of a fatal alarm
PARAMETERS_SAVING Parameters saving (see note 1 below)
CLEAR_NON_FATAL_ALARM Clearing non-fatal alarms
CLEAR_FATAL_ALARM Clearing fatal alarms
INTERNAL_CLOCK_SYNCHRO Internal clock synchronisation
CLOCK_SETTING Clock setting
DST_WITHOUT_SEASON DST (without change of season)
AC_FAIL_APPEARANCE AC Fail appearance (see note 2 below)
AC_FAIL_DISAPPEARANCE AC Fail disappearance (see note 2 below)
PWR_FAIL_APPEARANCE Power fail appearance (see note 3 below)
POWER_UP Power up
PROGRAMMING CM Data programming via communication
PROGRAMMING DI Data programming via push button
CANCEL_PROGRAMMING_DI Cancellation of data programming via push button
10. Technical appendix